Cloning, overexpression, and characterization of a thermoactive nitrilase from the hyperthermophilic archaeon Pyrococcus abyssi.

Four open reading frames encoding putative nitrilases were identified in the genomes of the hyperthermophilic archaea Pyrococcus abyssi, Pyrococcus horikoshii, Pyrococcus furiosus, and Aeropyrum pernix (growth temperature 90-100 degrees C). The nitrilase encoding genes were cloned and overexpressed in Escherichia coli. Enzymatic activity could only be detected in the case of Py. abyssi. This recombinant nitrilase was purified by heat treatment of E. coli crude extract followed by anion-exchange chromatography with a yield of 88% and a specific activity of 0.14 U/mg. The recombinant enzyme, which represents the first archaeal nitrilase, is a dimer (29.8 kDa/subunit) with an isoelectric point of pI 5.3. The nitrilase is active at a broad temperature (60-90 degrees C) and neutral pH range (pH 6.0-8.0). The recombinant enzyme is highly thermostable with a half-life of 25 h at 70 degrees C, 9 h at 80 degrees C, and 6 h at 90 degrees C. Thermostability measurements by employing circular dichroism spectroscopy and differential scanning microcalorimetry, at neutral pH, have shown that the enzyme unfolds up to 90 degrees C reversibly and has a T(m) of 112.7 degrees C. An inhibition of the enzymatic activity was observed in the presence of acetone and metal ions such as Ag(2+) and Hg(2+). The nitrilase hydrolyzes preferentially aliphatic substrates and the best substrate is malononitrile with a K(m) value of 3.47 mM.

pHluorin-based in vivo assay for hydrolase screening.

pHluorin, a pH-sensitive mutant of green fluorescent protein (GFP), acts as a sensor for intracellular pH shifts, triggered by hydrolytic enzymes. This principle was used to develop a pHluorin-based in vivo assay for hydrolase screening. The presented assay was evaluated for Escherichia coli (E. coli) cells, producing heterologous pHluorin and an esterase from Geobacillus stearothermophilus which is considered as a model hydrolase. Subsequently, the utility of this detection system was also demonstrated with recombinantly expressed hydantoinase and amidase in E. coli. This in vivo assay also shows capability for readout with flow cytometric devices. Population shifts of pHluorin-expressing E. coli cells were easily recognized due to pH changes caused by substrate hydrolysis.

Oxygen transfer phenomena in 48-well microtiter plates: determination by optical monitoring of sulfite oxidation and verification by real-time measurement during microbial growth.

Oxygen limitation is one of the most frequent problems associated with the application of shaking bioreactors. The gas-liquid oxygen transfer properties of shaken 48-well microtiter plates (MTPs) were analyzed at different filling volumes, shaking diameters, and shaking frequencies. On the one hand, an optical method based on sulfite oxidation was used as a chemical model system to determine the maximum oxygen transfer capacity (OTR(max)). On the other hand, the Respiration Activity Monitoring System (RAMOS) was applied for online measurement of the oxygen transfer rate (OTR) during growth of the methylotropic yeast Hansenula polymorpha. A proportionality constant between the OTR(max) of the biological system and the OTR(max) of the chemical system were indicated from these data, offering the possibility to transform the whole set of chemical data to biologically relevant conditions. The results exposed "out of phase" shaking conditions at a shaking diameter of 1 mm, which were confirmed by theoretical consideration with the phase number (Ph). At larger shaking diameters (2-50 mm) the oxygen transfer rate in MTPs shaken at high frequencies reached values of up to 0.28 mol/L/h, corresponding to a volumetric mass transfer coefficient (k(L)a) of 1,600 1/h. The specific mass transfer area (a) increases exponentially with the shaking frequency up to values of 2,400 1/m. On the contrary, the mass transfer coefficient (k(L)) is constant at a level of about 0.15 m/h over a wide range of shaking frequencies and shaking diameters. However, at high shaking frequencies, when the complete liquid volume forms a thin film on the cylindric wall of the well, the mass transfer coefficient (k(L)) increases linearly to values of up to 0.76 m/h. Essentially, the present investigation demonstrates that the 48-well plate outperforms the 96-well MTP and shake flasks at widely used operating conditions with respect to oxygen supply. The 48-well plates emerge, therefore, as an excellent alternative for microbial cultivation and expression studies combining the advantages of both the high-throughput 96-well MTP and the classical shaken Erlenmeyer flask.

The first aminoacylase-catalyzed enantioselective synthesis of aromatic beta-amino acids.

The first aminoacylase-catalyzed enantioselective synthesis of aromatic beta-amino acids is reported. The presence of an N-chloroacetyl group as acyl group in the substrate as well as the use of porcine kidney acylase I as a suitable enzyme component are prerequisites for this resolution process whereby optically active beta-amino acids are formed with high enantioselectivities of >98% ee.

Purification and properties of an enantioselective and thermoactive amidase from the thermophilic actinomycete Pseudonocardia thermophila.

A constitutively expressed thermoactive amidase from the thermophilic actinomycete Pseudonocardia thermophila was purified to homogeneity by applying hydrophobic interaction, anion exchange and gel filtration chromatography, giving a yield of 26% and a specific activity of 19.5 units mg(-1). The purified enzyme has an estimated molecular mass of 108 kDa and an isoelectric point of 4.2. The amidase is active at a broad pH range (pH 4-9) and temperature range (40-80 degrees C) and has a half-life of 1.2 h at 70 degrees C. Inhibition of enzyme activity was observed in the presence of metal ions, such as Co(2+), Hg(2+), Cu(2+), Ni(2+), and thiol reagents. The amidase has a broad substrate spectrum, including aliphatic, aromatic and amino acid amides. The presence of a double bond or a methyl group near the carboxamide group of aliphatic and amino acid amides enhances the enzymatic activity. Among aromatic amides with substitutions at the o-, m-, or p-position, the p-substituted amides are the preferred substrates. The highest acyl transferase activity was detected with hexanoamide, isobutyramide and propionamide. The K(m) values for propionamide, methacrylamide, benzamide and 2-phenylpropionamide are 7.4, 9.2, 4.9 and 0.9 mM, respectively. The amidase is highly S-stereoselective for 2-phenylpropionamide; and the racemic amide was converted to the corresponding S-acid with an enantiomeric excess of >95% at 50% conversion of the substrate. In contrast, the D,L-tryptophanamide and D,L-methioninamide were converted to the corresponding D,L-acids at the same rate. This thermostable enzyme represents the first reported amidase from a thermophilic actinomycete.

Rapid evaluation of oxygen and water permeation through microplate sealing tapes.

Eight commercially available microplate sealing tapes and 10 other suitable materials (transparent wound dressings) are compared qualitatively in terms of their ability to minimize water evaporation from a multiwell plate while maintaining the oxygen supply as high as possible, which is necessary for applications like aerobic growth. The transparency and sterility of the products are considered as well. All evaluated commercially available sealing tapes fall into one of the following two classes: (1) O(2) transfer is comparable to that of an unsealed plate, but water vapor retention is relatively low, or (2) O(2) transfer via the sealing is slower, but the water retention capability is comparably high. All but one of the evaluated wound dressings fall under the second class. That dressing, however, constitutes a compromise by showing both moderate O(2) permeability and medium water retention. But the estimated mass transport in a microtiter plate sealed with this dressing is about 5 times slower than that of an unsealed 96 well plate. The aim of this publication is to enable the reader to choose a microtiter plate sealing from the materials evaluated within this work and to use the rapid methods described herein to easily perform tests of additional sealing materials.

Base-Catalyzed Synthesis of N-(2-Arylethyl)anilines and Base-Promoted Domino Synthesis of 2,3-Dihydroindoles.

The base is the key to the new one-pot reaction, which leads to pharmacologically interesting 2,3-dihydroindoles. The use of potassium tert-butylalcoholate enables the selective addition of primary anilines to substituted styrenes and a new domino reaction, consisting of a hydroamination and an aryne cyclization (see scheme).